Description
The Aer is Atmizone’s first single-coil RTA with an outer diameter of 24mm. It comes as the further RnD result of the DotShell, after evolving its up / down wicking method, plus its signature design of the deck and vaporisation chamber. The performance of this design peaked with a large, round deck and chamber approach, proudly expressed through the Aer RTA. Add to this quite some extra features, after our intensive work on Tripod‘s and Tripod2‘s functions, waiting for you to find out.
Aer aesthetic features / finishes
The Aer is available in the following finishes:
Stainless Steel Matte (SS Matte)
SS Matte is a light-brushed matte / satin finish, close to the natural appearance of CNC processed Stainless Steel.
More about maintenance and cleaning in the Precautions section of the Tripod2 manual, as well as our support section.
Aer functional features
The Deck
The deck of of the Aer RTA is largely based on the DotShell. The deck’s form includes the distinctive two diagonal, half tube leads that serve as cotton nests, and at the same time restrict the flow of the liquid and the chamber space as desired. Cotton wicking is achieved with wick holes placed on the ceiling of the vaporisation chamber and the inner surface of this ceiling is carved, so that the whole assembly ensures a formation with impressive results on flavours analysis and vapor production. This approach has already delivered excellent results with the DotShell, but now, with even more space, larger pan head phillips post screws and more potential, it reaches highest standards of performance, regardless of your vaping preferences (MTL, rDL, DL).
The Air Flow
Already introduced with the Tripod2, here we also apply same design for real time configuration of the air flow right under the coil, through fixed air flow tubes. This way, the user can swap air flow tubes any time / real time, keeping the build and the liquid inside the tank absolutely intact. The air flow is set via five pin options, with air hole diameter 0.8mm/1.0mm/1.2mm/ 1.5mm/1.8mm respectively, pinned inside a D=4.0mm nest, plus through five air flow tubes with air hole diameter 2.0mm/2.5mm/3.0mm/3.5mm/4.0mm (last one also serving as pins nest). You can always skip the tubes and enjoy a perfect, airy 5.0mm Direct Lung draw.
Ergonomics and functions
We have worked on the thread-less rotary mechanism of the Tripod, with twist and pull / push actions on conveniently marked points, to improve it and make it even easier on the Aer. Stop points are involved, so that the user will have to look for alignment signs as little as possible. As with the Tripod and Tripod2, you can access your deck any time you want and check your build, or even change build without dumping the liquid of your tank.
The Aer utilises a new Top Cap design with no threads, which allows refilling in an instant, as you can remove and replace the Top Cap with less than half a turn.
The Drip Tips
Two bespoke 510 drip tips come with the Aer device package, a wide and a narrow version for different vaping styles. Apart from those, you can use any 510 drip tip of your liking without exceptions.
Increased Capacity
An extended capacity kit (reaches to 3.4ml [only available outside the EU]) offers the bigger autonomy you might be looking for.
Specs
Specs
-Air flow tuning via five pin options 0.8mm/1.0mm/1.2mm/ 1.5mm/1.8mm respectively, pinned inside a D=4.0mm nest, plus through five air flow tubes 2.0mm/2.5mm/3.0mm/3.5mm/4.0mm. No tube for a perfect airy 5.0mm DL
-M2.5mm pan head phillips post screws
-Two 510 drip tips (Narrow and Wide), can also host any 510 drip tip
-11.5mm post-to-post space, ~7.2mm post-to-post net space , ~7.0mm coil space
-Max. net coiling height ~4.5mm
–Chimney top inner D ~5.0mm
-Height 510 excl., 35.6mm [Drip Tip off]
-Weight ~72g [Drip Tip off]
Materials List
-SS316 foodgrade main device metal parts
-PEEK thermoplastic insulators
-POM (Acetal) Drip Tips
-SS304 post screws
-food grade o-rings and gaskets
-Quartz Glass Tank Body
Reviews
There are no reviews yet.