Description
The Tripod2 comes as the successor of the Tripod. It is Atmizone’s fresh suggestion of 22mm outer diameter RTA. The usual CNC high precision parts, bespoke silicon gaskets and high quality materials are always there. Stellar performance, easier top refill, real time access to deck, meet with top notch functional customisation and real time configuration of air flow. Fresh ideas and users feedback have come to further improve the classic Tripod design, to a smaller, more efficient and overall better Tripod2.
Features
Tripod2 aesthetic features / finishes
The Tripod is available in the following finishes:
Stainless Steel Matte (SS Matte)
SS Matte is a light-brushed matte / satin finish, close to the natural appearance of CNC processed Stainless Steel.
More about maintenance and cleaning in the Precautions section of the Tripod2 manual, as well as our support section.
Tripod2 functional features
The Deck
The deck of the Tripod is targeted for single coil setups with design details aiming to facilitate and improve rebuilding process as much as possible. Focusing on some of them, you can see high precision large pan head phillips post screws, conveniently placed rails to capture wire either between rail and screw head / body or around screw body (depending on wire D), cut – outs on outer deck rim for easier rebuilding, cut – outs on inner deck rim plus cotton wells to help proper cotton placement and juice distribution along cotton body, sufficient liquid intake slots on deck sides ( approx. 4.0mm x 2.0mm). The Tripod2 deck can literally host any size of single coil build, from classic small sized ones up to larger exotic coils.
The Air Flow
The big change comes with the real time configuration of the air flow. We have skipped the outdated adjustment via air flow control ring and decided that the airflow should be regulated in a more straightforward way, right under the coil, through fixed air flow tubes. But this, with the ability to swap air flow tubes any time / real time, keeping the build and the liquid inside the tank absolutely intact. You may dial in your air flow via five pin options, with air hole diameter 0.8mm/1.0mm/1.2mm/ 1.5mm/1.8mm respectively, pinned inside a D=4.0mm nest, plus through five air flow tubes with air hole diameter 2.0mm/2.5mm/3.0mm/3.5mm/4.0mm (last one also serving as pins nest), or use no tube and enjoy a perfect, airy 5.0mm Direct Lung draw.
The Chimneys
The Tripod2 will come with two Chimney options out of the box, carefully designed to serve MTL and tight rDL vaping (Restricted Chimney) on the one hand, and loose rDL with DL (Open Chimney) on the other. We have found this to be a simpler design solution, more friendly to the end user compared to the use of reducers, plus the fact that the stock tank capacity 2ml with the Open Chimney on, is increased to a useful 2.8ml when assembling the Restricted Chimney.
The Drip Tips
Two bespoke 510 drip tips come with the Tripod2 device package, a wide and a narrow version for different vaping styles. Apart from those, you can use any 510 drip tip of your liking without exceptions.
The functions
Real time access to deck and real time configuration of air flow are achieved by evolving the rotary function of the classic Tripod. We have incorporated stop points so that the user does not need to look for aligning sings, and included a quick release mechanism that allows the base of the RTA to stay screwed on top of the mod, while the rest of the RTA is released instantly to allow you swap the air flow pins / tubes in a sec. Add to these an improved Top Cap with start and stop points (no signs to align) which makes refilling a piece of cake. It can host any 510 drip tip of your liking without exceptions – that is, apart from the two, bespoke 510 drip tips that will come with the Tripod2 device package, a wide and a narrow version for different vaping styles.
Increased Capacity
An extended capacity kit (Open Chimney with extension – 3.4ml / Restricted Chimney with extension – 3.8ml [only available outside the EU]) and you will have a good idea of Tripod2’s potential for versatility.
Specs
Specs
-Air flow tuning via five pin options 0.8mm/1.0mm/1.2mm/ 1.5mm/1.8mm respectively, pinned inside a D=4.0mm nest, plus through five air flow tubes 2.0mm/2.5mm/3.0mm/3.5mm/4.0mm. No tube for a perfect airy 5.0mm DL
-M2.5mm pan head phillips post screws
-Two 510 drip tips (Narrow and Wide), can also host any 510 drip tip
-10.0mm post-to-post space, ~6.6mm post-to-post net space , ~5.8mm coil space
-Max. net coiling height ~8.8mm (Open Chimney) / ~7.0mm (Restricted Chimney)
–Chimney top inner D ~5.0mm (Open Chimney) / ~3.5mm (Restricted Chimney)
-Height 510 excl., 37.1mm [Drip Tip off]
-Weight ~50g [Drip Tip off]
Materials List
-SS316 foodgrade main device metal parts
-PEEK thermoplastic insulators
-POM (Acetal) Drip Tips
-SS304 post screws
-food grade o-rings and gaskets
-Quartz Glass Tank Body
Reviews
There are no reviews yet.